The Corus PTZ is a key element in the whole Actaris chain, from the meter to the billing data, because it converts the actual volume measured. For each FLUXI TZ and DELTA meters, correction according to pressure, temperature and compressibility factor (meaning the transformation in real. CORUS is an electronic volume converter dedicated to commercial and industrial applications. It converts the actual volume measured by the gas meter to.
|Published (Last):||10 September 2014|
|PDF File Size:||5.36 Mb|
|ePub File Size:||19.83 Mb|
|Price:||Free* [*Free Regsitration Required]|
VERIBOX – Automatic meter Reading
Any attempt to open the box lets permanent visible marks on the seal or on the enclosure. It operates pgz baud, baud, baud, baud.
Create your own integration Not supported yet? RAM and flash memories, …? It can withstand an overpressure of 1.
EnergoBit / Gas Volume Converter CORUS (PTZ)
Corus PTZ manages three pressure alarms: This data is protected by the metrological switch. From this screen, a long press on the ‘OK’ key launches a test of the display.
For safety reasons, it is strictly forbidden to use other modules than those specified by ‘Actaris’. This seal notably protects the access to: Solenvis continue to supply meters and services to RWE nPower.
The alarm outputs can remain actagis Once the configuration is completed and your data points are registered and subscribed to Wattics, you will receive access to your Wattics dashboard, and from then on will be able to log in to your Wattics Dashboard at http: Mode battery, externalautonomy: The tamper input can be put into one of the following modes: This alarm is not metrological and is dedicated to the control of the whole metering chain.
Based on the use of flash memory, its codus allows the download of a new firmware release through a laptop without board modification.
At a programmable period from 1s to 30s if the display is off same period than P and T acquisition?
According to the European regulation, it bears the CE marking and complies with the following directives: The frequency of retransmissions indicated in the table correspond to average frequency on the 2 outputs, when both channels are configured for pulses.
During the main cut, the internal backup battery will ensure the total functioning of Corus PTZ and the battery counter will be decreased with the same management described in the “battery alarm” chapter.
Proofreader of volume of gas SEVc-D (Corus) PTZ, TZ, Itron (Actaris).
This input shares the same terminals J3 and J4 and the same cable as the main LF input. The ‘OK’ displays the date and time, as well as the firmware version numbers.
All daily cous are stamped from the gas hour to the gas hour of the next day. We would like to thank all our customers for your continued support over the last 5 years.
LF input pulse weight? They can be either: A disc made into a magnetic material is fixed under the cover and allows the mechanical fixing of the optical head.
Program the required parameters Keyboard or communication? Both pulse outputs are individually characterized by qctaris pulse weight that can be configured to any value greater than or equal to the input pulse weight among 0.
Select the type of alarm to be resetted: Corus PTZ manages three temperature alarms: Status The event log has a capacity of events and cannot be reset.
Then, this alarm is set as long as the external supply is not present. Corus PTZ manages two conversion factor alarms: It must be preferentially screwed to the “Pr” reference pressure tap of the meter: The fixed part includes the following data: CORUS uses the measured working values of volume, pressure and temperature to provide:.
If Corus PTZ is in operation during the change, a pressure alarm will be generated. Specific value for some event only? The outputs generate a pulse every time the corresponding unconverted or converted index gets increased by a value equal to the selected output pulse weight. The presence of an optical head is magnetically detected.